Cladco 90° Verge Flashing for Standing Seam - 3m
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 85mm x 28mm x 25mm
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Protect your building from wet weather and improve aesthetic appeal
Description:
Cladco Verge Flashings are installed alongside Cladco 90° Verge Flashing Backer Plate to seal off the edges of your Standing Seam Roof. These Flashings will protect your building from wet weather and improve aesthetic appeal. Coated in GreenCoat® Pural BT, these Flashings are scratch, corrosion and weather resistant.
Cladco Standing Seam Verge Flashings are 3m in length. These Flashings are designed for use with our 90° Verge Flashing Backer Plate to create a seal for the edges of your roof, this ensures waterproofing and protection against weather damage.
Our Verge Flashing Backer Plates are available to buy separately. Alternatively, take a look at our Verge Flashing and Backer Plate Kit.
The coating of GreenCoat® Pural BT is made from Swedish rapeseed oil for an environmentally friendly finish with corrosion, scratch and weather resistance. SSAB Nordic quality steel has been used in the manufacturing of these Flashings for the best quality.
Our Flashings for Standing Seam are made from steel that is A1 fire rated to BS EN 13501.
Downloads & Data Sheets:
Slate Grey
Related Products
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Ribs
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Ribs
Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm
Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm
Cladco 90° Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Internal Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 90° Internal Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 85mm x 28mm x 25mm
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Protect your building from wet weather and improve aesthetic appeal
Description:
Cladco Verge Flashings are installed alongside Cladco 90° Verge Flashing Backer Plate to seal off the edges of your Standing Seam Roof. These Flashings will protect your building from wet weather and improve aesthetic appeal. Coated in GreenCoat® Pural BT, these Flashings are scratch, corrosion and weather resistant.
Cladco Standing Seam Verge Flashings are 3m in length. These Flashings are designed for use with our 90° Verge Flashing Backer Plate to create a seal for the edges of your roof, this ensures waterproofing and protection against weather damage.
Our Verge Flashing Backer Plates are available to buy separately. Alternatively, take a look at our Verge Flashing and Backer Plate Kit.
The coating of GreenCoat® Pural BT is made from Swedish rapeseed oil for an environmentally friendly finish with corrosion, scratch and weather resistance. SSAB Nordic quality steel has been used in the manufacturing of these Flashings for the best quality.
Our Flashings for Standing Seam are made from steel that is A1 fire rated to BS EN 13501.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.