Cladco 90° Internal Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 120mm x 120mm
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Provide your cladding structure with sealed internal corners
Description:
Cladco 90-degree Internal Corner Barge Flashings for Standing Seam Sheeting are available in 3m lengths and measure 120mm x 120mm. Use these Flashings to finish off the corners of your installation, clamping to Z Bar pieces, available separately or as a Internal Barge Flashing Kit. Made from galvanised steel coated with GreenCoat® Pural BT for an eco-friendly solution.
Cladco 90-degree Internal Corner Barge Flashings for Standing Seam installations are manufactured from the same high-quality, sustainable GreenCoat® Pural BT Coating as our Standing Seam Sheeting.
Install Internal Corner Flashings to the internal corners of a cladding or roofing project to create a professional finish. SSAB Nordic quality steel has been used in the manufacturing of these Flashings for the best quality.
Measuring 120mm x 120mm, our 3m Internal Corner Barge Flashings are installed alongside our Z Bar Flashings to complete your Standing Seam project.
Downloads & Data Sheets:
Slate Grey
Related Products
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Ribs
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Ribs
Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm
Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm
Cladco 90° Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Internal Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 90° Internal Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 120mm x 120mm
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Provide your cladding structure with sealed internal corners
Description:
Cladco 90-degree Internal Corner Barge Flashings for Standing Seam Sheeting are available in 3m lengths and measure 120mm x 120mm. Use these Flashings to finish off the corners of your installation, clamping to Z Bar pieces, available separately or as a Internal Barge Flashing Kit. Made from galvanised steel coated with GreenCoat® Pural BT for an eco-friendly solution.
Cladco 90-degree Internal Corner Barge Flashings for Standing Seam installations are manufactured from the same high-quality, sustainable GreenCoat® Pural BT Coating as our Standing Seam Sheeting.
Install Internal Corner Flashings to the internal corners of a cladding or roofing project to create a professional finish. SSAB Nordic quality steel has been used in the manufacturing of these Flashings for the best quality.
Measuring 120mm x 120mm, our 3m Internal Corner Barge Flashings are installed alongside our Z Bar Flashings to complete your Standing Seam project.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.