Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 85mm x 28mm x 25mm (Verge Flashing), 90mm x 60mm x 23mm (Backer Plate)
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Provide your cladding structure with sealed internal corners
Description:
Cladco Verge Flashing Kit includes a Corner Verge Flashing and our 90° Corner Verge Flashing Backer Plate, both finished with a GreenCoat® Pural BT coating. Corner Verges are installed at the sides of Standing Seam Roof Sheets to seal off the edges of your roof. These Flashings increase weather proofing for your building.
Cladco Verge Flashing Kit comes with 1 x Verge Flashing in GreenCoat® Pural BT (3m) and 1 x 90° Verge Backer Plate in GreenCoat® Pural BT (3m). These components are installed together at the edges of your Standing Seam Roof for a protected and sealed roof.
In addition to adding protection and waterproofing to your building, Cladco Verge Flashing Kits significantly improve the look of the exterior of your property. Coated in GreenCoat® Pural BT, our Verge Flashings are durable and resistant to scratches, weather damage and corrosion.
The SSAB Nordic quality steel used to make our Standing Seam Verge Flashings is A1 fire rated to BS EN 13501.
Downloads & Data Sheets:
Slate Grey
Related Products
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Ribs
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Ribs
Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm
Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm
Cladco 90° Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Internal Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 90° Internal Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 85mm x 28mm x 25mm (Verge Flashing), 90mm x 60mm x 23mm (Backer Plate)
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Provide your cladding structure with sealed internal corners
Description:
Cladco Verge Flashing Kit includes a Corner Verge Flashing and our 90° Corner Verge Flashing Backer Plate, both finished with a GreenCoat® Pural BT coating. Corner Verges are installed at the sides of Standing Seam Roof Sheets to seal off the edges of your roof. These Flashings increase weather proofing for your building.
Cladco Verge Flashing Kit comes with 1 x Verge Flashing in GreenCoat® Pural BT (3m) and 1 x 90° Verge Backer Plate in GreenCoat® Pural BT (3m). These components are installed together at the edges of your Standing Seam Roof for a protected and sealed roof.
In addition to adding protection and waterproofing to your building, Cladco Verge Flashing Kits significantly improve the look of the exterior of your property. Coated in GreenCoat® Pural BT, our Verge Flashings are durable and resistant to scratches, weather damage and corrosion.
The SSAB Nordic quality steel used to make our Standing Seam Verge Flashings is A1 fire rated to BS EN 13501.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.