ClassicLiquid® Joint Seal 600cc
Couldn't load pickup availability
Delivery:
NEXT DAY Delivery (if ordered before 14:00)
Key Features:
- Size: 600cc
- Application: CLassicLiquid joint sealant adheres to most substrates and is perfect for creating a fillet on 90° angles
Description:
The CLassicLiquid joint sealant adheres to most substrates and is perfect for creating a fillet on 90° angles. E.g upstands, skylights, pipework etc. It is also ideal for filling minor blemishes in the subsrate.
The sealant is easy to apply even in very low temperatures and the storage stability is unlike any polyurethane sealant in the market. The Sealant is applied using a Mastic Applicator Gun.
Application:
Clean joint thoroughly and ensure that no oil, grease, silicone or wax contaminants are present.
For most applications primer is not required unless onto a very porous or friable surface, if primer required use ClassicLiquid Primer.
Bond area surfaces thoroughly to avoid the possibility of air bubbles being blown into the uncured product if the substrate temperature rises.
On applications where the depth of the expansion joint exceeds the width then it is necessary to use an open cell polyurethane backing rod (of suitable size) to ensure a firm backing to the Joint Mastic against which it can be tooled off.
Slide the 600cc foil cartridge into the application gun, cut off the very end of the sealant packaging and fit the gun with the nozzle that has been cut to deliver the right bead size for the given application.
Extrude the Joint Mastic into the joint ensuring that no air is trapped in the joint. Wide joints may well require more than one pass of the application gun to ensure full contact of the Joint Mastic with the sides and bottom of the joint.
Tooling of the Joint Mastic is recommended immediately after application of the sealant to ensure that all air bubbles are excluded and a smooth finish provided if other products are being applied over.
Downloads & Data Sheets:
Related Products
Delivery:
NEXT DAY Delivery (if ordered before 14:00)
Key Features:
- Size: 600cc
- Application: CLassicLiquid joint sealant adheres to most substrates and is perfect for creating a fillet on 90° angles
Description:
The CLassicLiquid joint sealant adheres to most substrates and is perfect for creating a fillet on 90° angles. E.g upstands, skylights, pipework etc. It is also ideal for filling minor blemishes in the subsrate.
The sealant is easy to apply even in very low temperatures and the storage stability is unlike any polyurethane sealant in the market. The Sealant is applied using a Mastic Applicator Gun.
Application:
Clean joint thoroughly and ensure that no oil, grease, silicone or wax contaminants are present.
For most applications primer is not required unless onto a very porous or friable surface, if primer required use ClassicLiquid Primer.
Bond area surfaces thoroughly to avoid the possibility of air bubbles being blown into the uncured product if the substrate temperature rises.
On applications where the depth of the expansion joint exceeds the width then it is necessary to use an open cell polyurethane backing rod (of suitable size) to ensure a firm backing to the Joint Mastic against which it can be tooled off.
Slide the 600cc foil cartridge into the application gun, cut off the very end of the sealant packaging and fit the gun with the nozzle that has been cut to deliver the right bead size for the given application.
Extrude the Joint Mastic into the joint ensuring that no air is trapped in the joint. Wide joints may well require more than one pass of the application gun to ensure full contact of the Joint Mastic with the sides and bottom of the joint.
Tooling of the Joint Mastic is recommended immediately after application of the sealant to ensure that all air bubbles are excluded and a smooth finish provided if other products are being applied over.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.