ClassicLiquid® Detailer 5kg
Couldn't load pickup availability
Delivery:
NEXT DAY Delivery (if ordered before 14:00)
Key Features:
- Size: 5kg
- Coverage: 1.8kg per m2
- Application: Used for detailing upstands, pipe collars and internal and external corners within the ClassicLiquid roof system
Description:
ClassicLiquid Detailer is a non-drip, fibre reinforced liquid. It is used for detailing upstands, pipe collars and internal and external corners within the ClassicLiquid roof system.
Due to its unique formulation it cures rapidly to form a bubble free thick layer membrane, with excellent mechanical properties. The reinforcing fibres within the product enable complex weathering details to be formed, without the need to cut and shape sheet reinforcing material. This product is designed for use on upstands and is less prone to sagging when applied to vertical surfaces.
The ClassicLiquid Detailer is applied at a minimum coverage rate of 1.8Kg/sqm meaning that the following coverage rates can be acheived:
5Kg = 2.7 sqm (18 lm at 150mm upstand height)
15Kg = 8.3 sqm (55 lm at 150mm upstand height)
Application:
It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles. Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry.
Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary dependant on surface porosity.
Downloads & Data Sheets:
Related Products
Delivery:
NEXT DAY Delivery (if ordered before 14:00)
Key Features:
- Size: 5kg
- Coverage: 1.8kg per m2
- Application: Used for detailing upstands, pipe collars and internal and external corners within the ClassicLiquid roof system
Description:
ClassicLiquid Detailer is a non-drip, fibre reinforced liquid. It is used for detailing upstands, pipe collars and internal and external corners within the ClassicLiquid roof system.
Due to its unique formulation it cures rapidly to form a bubble free thick layer membrane, with excellent mechanical properties. The reinforcing fibres within the product enable complex weathering details to be formed, without the need to cut and shape sheet reinforcing material. This product is designed for use on upstands and is less prone to sagging when applied to vertical surfaces.
The ClassicLiquid Detailer is applied at a minimum coverage rate of 1.8Kg/sqm meaning that the following coverage rates can be acheived:
5Kg = 2.7 sqm (18 lm at 150mm upstand height)
15Kg = 8.3 sqm (55 lm at 150mm upstand height)
Application:
It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles. Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry.
Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary dependant on surface porosity.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.