ClassicBond® Horizontal Rain Outlet - 100mm
Couldn't load pickup availability
Delivery:
Current Delivery: 1 - 2 days
Description:
Horizontal Drain Water Outlet 100mm. Used For: EPDM Horizontal chute outlet is used to form a through wall outlet for dispersing water into a hopper or similar.
Size: Requires Hole Size 105mm x 105mm
Installation Notes:
1) Install rubber membrane as per instructions.
2) Cut hole in membrane and slide horizontal outlet in to place.
3) Use 9" Elastoform tape to waterproof outlet on to rubber membrane.
Downloads & Data Sheets:
Related Products
ClassicBond® Rubber Roof EPDM (1.2mm thick) - CUT TO SIZE
ClassicBond® Rubber Roof EPDM (1.5mm thick) - CUT TO SIZE
ClassicBond® EPDM Flat Roof Extension Kit - (CUT TO SIZE)
ClassicBond® EPDM Garage Rubber Roof Kit - (CUT TO SIZE)
ClassicBond® EPDM Dormer Rubber Roof Kit - (CUT TO SIZE)
ClassicBond® WBA Water Based Deck Adhesive
ClassicBond® Contact Bonding Adhesive
ClassicBond® Rubber Primer
ClassicBond® Sprayable Contact Bonding Adhesive 500ml
ClassicBond® SPB Spray Contact Bonding Adhesive
Sure Edge 2 Part Gutter Drip Trim - 2.5 mtr
Sure Edge Kerb Trim - 2.5 mtr
Plastisol Metal Wall Trim for ClassicBond® Rubber Roofing - 3 mtr
Plastisol Metal Edge Trim for ClassicBond® Rubber Roofing - 3 mtr
Elastoform Uncured EPDM Form Flash Tape - 225mm
ClassicBond® Cover Tape - 150mm
ClassicBond® Splice Tape - 75mm
ClassicBond® External Corner Patch Un-cured Tape - 225mm x 300mm
ClassicBond® Internal Corner Patch Uncured Tape - 150mm x 225mm
ClassicBond® Russ Tape - Mechanical Bonding
ClassicBond® EDPM Pipe Boot
ClassicBond® Internal Drain 68mm Kit
ClassicBond® Horizontal Rain Outlet 100mm Complete Installation Kit
ClassicBond® Horizontal Rain Outlet - 100mm
EDPM Flat Roof Breather Vent
Sure Edge Drip Corner External
Sure Edge Drip Internal Corner
Sure Edge Kerb External Corner
Sure Edge Kerb Internal Corner
Plastisol Metal Trim Corner & Connector
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
ClassicBond® SPB Spray Gun Hose 4M
EPDM Aluminium Termination Bar for ClassicBond® - 2mtr
ClassicBond® Brass Penny Roller
ClassicBond® DIY Seam Roller
ClassicBond® EDPM Membrane Scissors
ClassicBond®Black Mastic for Wall Trim
ClassicBond® Lap Sealant
ClassicBond® Water Cut off Mastic
ClassicBond® Adhesive Gun
ClassicBond® Tool Kit for DIY Installation
ClassicBond® Professional Installation Kit
ClassicBond® Harris Roller Set
ClassicBond® 50mm Paint Brush
EDPM Membrane Scissors
Resitrix Self Adhesive Drain Outlet
Steinel HL1920E DIY Heat Gun
Steinel HG2220E Heat Gun 240V
Steinel HG2420E Heat Gun 240V
Leister Triac ST 120V Heat Gun
Delivery:
Current Delivery: 1 - 2 days
Description:
Horizontal Drain Water Outlet 100mm. Used For: EPDM Horizontal chute outlet is used to form a through wall outlet for dispersing water into a hopper or similar.
Size: Requires Hole Size 105mm x 105mm
Installation Notes:
1) Install rubber membrane as per instructions.
2) Cut hole in membrane and slide horizontal outlet in to place.
3) Use 9" Elastoform tape to waterproof outlet on to rubber membrane.
Downloads & Data Sheets:
Be the first to know about our latest offers, product deals & exclusive discounts!
- Choosing a selection results in a full page refresh.
Your cart
Subtotal