Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 150mm x 150mm
- Angle: 130º
- Overlap: Allow 200mm minimum
- Finish: Plain Galvanised Finish
- Material: Galvanised Steel
Description:
Cladco Ridge flashings are used at the apex of the roof to join the two sides together. At Cladco, our ridge flashings are folded to a 130-degree internal angle and will flex 10 – 15 degrees either way, dependent on the angle of your roof. Ridges are a major component in any profiled clad apex roof, and they will enhance the aesthetics of any building, especially in galvanised.
Roof edge flashing ridges include a safety welt on the edge to increase the strength of the material and come as a 3m length as standard. When fitting the ridge, please remember to allow a minimum of 200mm overlap from one ridge piece to the next. Ridge pieces sit on top of the roofing sheets and are stitched (using st22 stitching screws) to the sheet below to secure them in place.
Used at the apex join of two sides of the roof, ridge flashings are a necessary part of any profiled clad building and with the range and colours that are available, can enhance the aesthetics of any structure.
Our roof edge flashings include a safety welt to increase the strength of the material. We can fold most flashing shapes to customers’ requirements in 3-metre lengths at short notice.
Please note: The 150 x 150 flashings give a coverage of 142mm x 142mm due to the 8mm welt.
Downloads & Data Sheets:
Product Installation Instructions
Product Video:
Related Products
Cladco TEK Sheeting Screws to Wood with 19mm Bonded Washer (pack of 100)
Cladco TEK Sheeting Screws to Light Steel with 19mm Bonded Washer (Pack of 100)
Cladco TEK Sheeting Screws to Heavy Steel with 19mm Bonded Washer (Pack of 100)
Cladco Sheeting Screws to Wood with BAZ Washer (Pack of 100)
Cladco 22mm Stitcher Screws with a 16mm Bonded Washer (Pack of 100)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 32/1000 Sheeting - Black (Pairs)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 34/1000 Sheeting - Black (Pairs)
Cladco Tileform Profiled Foam Fillers to fit 41/1000 Tileform Sheeting - Black (Pairs)
Cladco Corrugated 13/3 Profiled Foam Fillers Supaseal (25mm) - Black with 6mm base
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in Polyester Paint Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Polyester Paint Finish - 200mm x 200mm
Cladco Polyester Paint Coated 0.7mm Flat Sheet 3000mm x 1240mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in PVC Plastisol Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in in PVC Plastisol Finish - 200mm x 200mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Galvanised Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Plain Galvanised Finish - 200mm x 200mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Prelaq Mica Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in Prelaq Mica Finish - 200mm x 200mm
Soudal Silirub 2 Silicone Elastic Low Modulus Sealant - 300ml Clear
Cut Level 5 Protective Safety Gloves - Conforms to EN388 (4543)
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 150mm x 150mm
- Angle: 130º
- Overlap: Allow 200mm minimum
- Finish: Plain Galvanised Finish
- Material: Galvanised Steel
Description:
Cladco Ridge flashings are used at the apex of the roof to join the two sides together. At Cladco, our ridge flashings are folded to a 130-degree internal angle and will flex 10 – 15 degrees either way, dependent on the angle of your roof. Ridges are a major component in any profiled clad apex roof, and they will enhance the aesthetics of any building, especially in galvanised.
Roof edge flashing ridges include a safety welt on the edge to increase the strength of the material and come as a 3m length as standard. When fitting the ridge, please remember to allow a minimum of 200mm overlap from one ridge piece to the next. Ridge pieces sit on top of the roofing sheets and are stitched (using st22 stitching screws) to the sheet below to secure them in place.
Used at the apex join of two sides of the roof, ridge flashings are a necessary part of any profiled clad building and with the range and colours that are available, can enhance the aesthetics of any structure.
Our roof edge flashings include a safety welt to increase the strength of the material. We can fold most flashing shapes to customers’ requirements in 3-metre lengths at short notice.
Please note: The 150 x 150 flashings give a coverage of 142mm x 142mm due to the 8mm welt.
Downloads & Data Sheets:
Product Installation Instructions
Product Video:
- Choosing a selection results in a full page refresh.