Elastoform Uncured EPDM Form Flash Tape - 225mm
Couldn't load pickup availability
Delivery:
Current Delivery: 1 - 2 days
Key Features:
- Length: Priced per Linear meter
- Width: 225mm
-
Use: Designed to form internal / external corners, awkward features, pipes, penetrations, drain outlets and any other feature where the ability to stretch and form the material is required
Description:
Sold per linear metre - Please enter quantity required in linear meters (for example, to order a 4 meter length enter 4 in the quantity field).
Form Flash designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.
The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond Rubber Primer and allowed to dry (touch dry), smooth side down.
Downloads & Data Sheets:
ClassicBond Elastoform Tape External Corner Forming
ClassicBond Elastoform Tape Internal Corner Forming
ClassicBond Elastoform Tap Pipes and Skylights
Related Products
ClassicBond® Rubber Roof EPDM (1.2mm thick) - CUT TO SIZE
ClassicBond® Rubber Roof EPDM (1.5mm thick) - CUT TO SIZE
ClassicBond® EPDM Flat Roof Extension Kit - (CUT TO SIZE)
ClassicBond® EPDM Garage Rubber Roof Kit - (CUT TO SIZE)
ClassicBond® EPDM Dormer Rubber Roof Kit - (CUT TO SIZE)
Plastisol Metal Wall Trim for ClassicBond® Rubber Roofing - 3 mtr
Plastisol Metal Edge Trim for ClassicBond® Rubber Roofing - 3 mtr
ClassicBond® External Corner Patch Un-cured Tape - 225mm x 300mm
ClassicBond® Internal Corner Patch Uncured Tape - 150mm x 225mm
ClassicBond® Horizontal Rain Outlet 100mm Complete Installation Kit
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
EPDM Aluminium Termination Bar for ClassicBond® - 2mtr
Delivery:
Current Delivery: 1 - 2 days
Key Features:
- Length: Priced per Linear meter
- Width: 225mm
-
Use: Designed to form internal / external corners, awkward features, pipes, penetrations, drain outlets and any other feature where the ability to stretch and form the material is required
Description:
Sold per linear metre - Please enter quantity required in linear meters (for example, to order a 4 meter length enter 4 in the quantity field).
Form Flash designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.
The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond Rubber Primer and allowed to dry (touch dry), smooth side down.
Downloads & Data Sheets:
ClassicBond Elastoform Tape External Corner Forming
ClassicBond Elastoform Tape Internal Corner Forming
ClassicBond Elastoform Tap Pipes and Skylights
- Choosing a selection results in a full page refresh.