ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
Couldn't load pickup availability
Delivery:
Current Delivery: 1 - 2 days
Key Features:
- Material : Metal Spray Gun
- Tip: Spray tip included
- Application: SPB Spray Gun specifically designed for ClassicBond SPB Spray Adhesive
Description:
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive
Application Up-stands: Spray the contact bonding adhesive onto the upstand and the back of the membrane from a distance of 100mm-150mm. It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.
Application Non-Permeable Deck: Spray the adhesive onto both the deck and underside of the membrane evenly from an approximate distance of 100-150mm. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck. Note It is not possible to re-position the membrane once stuck down using contact adhesive.
Installation Tip: Allow sufficient time for the contact adhesive to become touch-dry depending on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber roofing membrane being partially breathable.
Coverage:
22 Litres (Coverage up to 80 sqm)
0.17 Ltr / m2 when applied to both sides (depending on surfaces)
Downloads & Data Sheets:
ClassicBond Adhesives Product Data Sheet
Related Products
ClassicBond® Rubber Roof EPDM (1.2mm thick) - CUT TO SIZE
ClassicBond® Rubber Roof EPDM (1.5mm thick) - CUT TO SIZE
ClassicBond® EPDM Flat Roof Extension Kit - (CUT TO SIZE)
ClassicBond® EPDM Garage Rubber Roof Kit - (CUT TO SIZE)
ClassicBond® EPDM Dormer Rubber Roof Kit - (CUT TO SIZE)
Plastisol Metal Wall Trim for ClassicBond® Rubber Roofing - 3 mtr
Plastisol Metal Edge Trim for ClassicBond® Rubber Roofing - 3 mtr
ClassicBond® External Corner Patch Un-cured Tape - 225mm x 300mm
ClassicBond® Internal Corner Patch Uncured Tape - 150mm x 225mm
ClassicBond® Horizontal Rain Outlet 100mm Complete Installation Kit
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
EPDM Aluminium Termination Bar for ClassicBond® - 2mtr
Delivery:
Current Delivery: 1 - 2 days
Key Features:
- Material : Metal Spray Gun
- Tip: Spray tip included
- Application: SPB Spray Gun specifically designed for ClassicBond SPB Spray Adhesive
Description:
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive
Application Up-stands: Spray the contact bonding adhesive onto the upstand and the back of the membrane from a distance of 100mm-150mm. It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.
Application Non-Permeable Deck: Spray the adhesive onto both the deck and underside of the membrane evenly from an approximate distance of 100-150mm. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck. Note It is not possible to re-position the membrane once stuck down using contact adhesive.
Installation Tip: Allow sufficient time for the contact adhesive to become touch-dry depending on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber roofing membrane being partially breathable.
Coverage:
22 Litres (Coverage up to 80 sqm)
0.17 Ltr / m2 when applied to both sides (depending on surfaces)
Downloads & Data Sheets:
ClassicBond Adhesives Product Data Sheet
- Choosing a selection results in a full page refresh.