ClassicBond® Splice Tape - 75mm
Couldn't load pickup availability
Delivery:
Current Delivery: 1 - 2 days
Key Features:
- Length: Priced per Linear meter
- Width: 75mm
-
Use: Designed to join two pieces of EPDM membrane when it is not practical to complete the roof in one piece. e.g. "L" shaped Roof
Description:
Sold per linear metre - Please enter quantity required in linear meters (for example, to order a 4 meter length enter 4 in the quantity field).
3 Inch EPDM seam tape is used to join two pieces of EPDM membrane when it is not practical to complete the roof in one piece. e.g. "L" shaped Roof
Ensure your two pieces of EPDM membrane that you wish to join are overlapping by 75 mm (3"). Fold back the top layer and apply Classicbond rubber primer to both surfaces. Wait until the primer is dry to the touch and then, leaving the backing film on the splice tape starting at one end stick the tape down onto the bottom EPDM membrane.
Use your hand to smooth down the splice tape ensuring there are no creases. allow the top membrane to fold back into position and then peal away the backing film pulling at a 45 degree angle while smoothing the top membrane over the seam tape with your hand. Use Seam Roller to apply pressure.
Downloads & Data Sheets:
ClassicBond Seam Tape instructions
Related Products
ClassicBond® Rubber Roof EPDM (1.2mm thick) - CUT TO SIZE
ClassicBond® Rubber Roof EPDM (1.5mm thick) - CUT TO SIZE
ClassicBond® EPDM Flat Roof Extension Kit - (CUT TO SIZE)
ClassicBond® EPDM Garage Rubber Roof Kit - (CUT TO SIZE)
ClassicBond® EPDM Dormer Rubber Roof Kit - (CUT TO SIZE)
Plastisol Metal Wall Trim for ClassicBond® Rubber Roofing - 3 mtr
Plastisol Metal Edge Trim for ClassicBond® Rubber Roofing - 3 mtr
ClassicBond® External Corner Patch Un-cured Tape - 225mm x 300mm
ClassicBond® Internal Corner Patch Uncured Tape - 150mm x 225mm
ClassicBond® Horizontal Rain Outlet 100mm Complete Installation Kit
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
EPDM Aluminium Termination Bar for ClassicBond® - 2mtr
Delivery:
Current Delivery: 1 - 2 days
Key Features:
- Length: Priced per Linear meter
- Width: 75mm
-
Use: Designed to join two pieces of EPDM membrane when it is not practical to complete the roof in one piece. e.g. "L" shaped Roof
Description:
Sold per linear metre - Please enter quantity required in linear meters (for example, to order a 4 meter length enter 4 in the quantity field).
3 Inch EPDM seam tape is used to join two pieces of EPDM membrane when it is not practical to complete the roof in one piece. e.g. "L" shaped Roof
Ensure your two pieces of EPDM membrane that you wish to join are overlapping by 75 mm (3"). Fold back the top layer and apply Classicbond rubber primer to both surfaces. Wait until the primer is dry to the touch and then, leaving the backing film on the splice tape starting at one end stick the tape down onto the bottom EPDM membrane.
Use your hand to smooth down the splice tape ensuring there are no creases. allow the top membrane to fold back into position and then peal away the backing film pulling at a 45 degree angle while smoothing the top membrane over the seam tape with your hand. Use Seam Roller to apply pressure.
Downloads & Data Sheets:
ClassicBond Seam Tape instructions
- Choosing a selection results in a full page refresh.