By Classic Bond
ClassicBond® EDPM Pipe Boot
Regular price
£67.47
(inc VAT)
£56.23
(ex VAT)
Regular price
Sale price
Unit price
per
£67.47
Couldn't load pickup availability
Delivery:
Current Delivery: 1 - 2 days
Description:
EDPM Pipe Weathering Boot with Steel Adjustable Hose Clip
EPDM pipe boots are used to create a waterproof seal between the roof deck and protruding pipework.
Installation Notes:
1) After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2) Mark the roofing membrane to show where rubber primer is to be applied
3) Remove boot and apply rubber primer
4) Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5) Smooth down the join with a seam roller
6) Roll back the top of the boot and apply water cut off mastic around the pipe.
7) Roll back top of boot over mastic and install and tighten hose clip using screw driver.
Regular price
£67.47
(inc VAT)
£56.23
(ex VAT)
Regular price
Sale price
£67.47
75mm - 150mm
Related Products
Classic Bond
ClassicBond® Rubber Roof EPDM (1.2mm thick) - CUT TO SIZE
£24.74
(inc VAT)
£20.62
(ex VAT)
Classic Bond
ClassicBond® Rubber Roof EPDM (1.5mm thick) - CUT TO SIZE
£34.15
(inc VAT)
£28.46
(ex VAT)
Classic Bond
ClassicBond® EPDM Flat Roof Extension Kit - (CUT TO SIZE)
£393.46
(inc VAT)
£327.88
(ex VAT)
Classic Bond
ClassicBond® EPDM Garage Rubber Roof Kit - (CUT TO SIZE)
£488.87
(inc VAT)
£407.39
(ex VAT)
Classic Bond
ClassicBond® EPDM Dormer Rubber Roof Kit - (CUT TO SIZE)
£181.60
(inc VAT)
£151.33
(ex VAT)
Classic Bond
Plastisol Metal Wall Trim for ClassicBond® Rubber Roofing - 3 mtr
£12.94
(inc VAT)
£10.78
(ex VAT)
Classic Bond
Plastisol Metal Edge Trim for ClassicBond® Rubber Roofing - 3 mtr
£19.40
(inc VAT)
£16.17
(ex VAT)
Classic Bond
ClassicBond® External Corner Patch Un-cured Tape - 225mm x 300mm
£7.06
(inc VAT)
£5.88
(ex VAT)
Classic Bond
ClassicBond® Internal Corner Patch Uncured Tape - 150mm x 225mm
£4.59
(inc VAT)
£3.83
(ex VAT)
Classic Bond
ClassicBond® Horizontal Rain Outlet 100mm Complete Installation Kit
£42.93
(inc VAT)
£35.78
(ex VAT)
Classic Bond
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
£104.00
(inc VAT)
£86.67
(ex VAT)
Classic Bond
EPDM Aluminium Termination Bar for ClassicBond® - 2mtr
£25.11
(inc VAT)
£20.93
(ex VAT)
Delivery:
Current Delivery: 1 - 2 days
Description:
EDPM Pipe Weathering Boot with Steel Adjustable Hose Clip
EPDM pipe boots are used to create a waterproof seal between the roof deck and protruding pipework.
Installation Notes:
1) After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2) Mark the roofing membrane to show where rubber primer is to be applied
3) Remove boot and apply rubber primer
4) Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5) Smooth down the join with a seam roller
6) Roll back the top of the boot and apply water cut off mastic around the pipe.
7) Roll back top of boot over mastic and install and tighten hose clip using screw driver.
- Choosing a selection results in a full page refresh.