Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 200mm x 200mm
- Angle: 90º Internal Angle
- Overlap: Allow 150mm minimum
- Finish: PVC Plastisol (please select colour)
- Material: Galvanised Steel
Description:
Cladco Roof Barge boards, sometimes known as Verges, are used at the end of a run of sheets to trim and seal off the edge of the roof. All roof barge flashings are a vital part of any profiled clad roof; they not only help to weatherproof the building but also add to it aesthetically too.
Roof Barge Boards are available in a range of finishes and colours to match or contrast our roofing sheets, depending on the look you are after. They are secured by stitching them (using st22 stitching screws) to the roofing sheet below. You will need to allow an overlap of a minimum 100mm when fitting roof barge boards end on end.
Manufactured as a 3m length and refolded to a 90-degree internal angle, they will flex 10 – 15 degrees either way, dependent on your needs. Cladco Roof Barge Boards come with a safety welt to increase the strength of the material. Used at the end of a run of sheets to trim and seal off the edge of the roof.
Downloads & Data Sheets:
Product Installation Instructions
PVC Plastisol Performance Overview
Product Video:
Related Products
Cladco TEK Sheeting Screws to Wood with 19mm Bonded Washer (pack of 100)
Cladco TEK Sheeting Screws to Light Steel with 19mm Bonded Washer (Pack of 100)
Cladco TEK Sheeting Screws to Heavy Steel with 19mm Bonded Washer (Pack of 100)
Cladco Sheeting Screws to Wood with BAZ Washer (Pack of 100)
Cladco 22mm Stitcher Screws with a 16mm Bonded Washer (Pack of 100)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 32/1000 Sheeting - Black (Pairs)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 34/1000 Sheeting - Black (Pairs)
Cladco Tileform Profiled Foam Fillers to fit 41/1000 Tileform Sheeting - Black (Pairs)
Cladco Corrugated 13/3 Profiled Foam Fillers Supaseal (25mm) - Black with 6mm base
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in Polyester Paint Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Polyester Paint Finish - 200mm x 200mm
Cladco Polyester Paint Coated 0.7mm Flat Sheet 3000mm x 1240mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in PVC Plastisol Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in in PVC Plastisol Finish - 200mm x 200mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Galvanised Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Plain Galvanised Finish - 200mm x 200mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Prelaq Mica Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in Prelaq Mica Finish - 200mm x 200mm
Soudal Silirub 2 Silicone Elastic Low Modulus Sealant - 300ml Clear
Cut Level 5 Protective Safety Gloves - Conforms to EN388 (4543)
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 200mm x 200mm
- Angle: 90º Internal Angle
- Overlap: Allow 150mm minimum
- Finish: PVC Plastisol (please select colour)
- Material: Galvanised Steel
Description:
Cladco Roof Barge boards, sometimes known as Verges, are used at the end of a run of sheets to trim and seal off the edge of the roof. All roof barge flashings are a vital part of any profiled clad roof; they not only help to weatherproof the building but also add to it aesthetically too.
Roof Barge Boards are available in a range of finishes and colours to match or contrast our roofing sheets, depending on the look you are after. They are secured by stitching them (using st22 stitching screws) to the roofing sheet below. You will need to allow an overlap of a minimum 100mm when fitting roof barge boards end on end.
Manufactured as a 3m length and refolded to a 90-degree internal angle, they will flex 10 – 15 degrees either way, dependent on your needs. Cladco Roof Barge Boards come with a safety welt to increase the strength of the material. Used at the end of a run of sheets to trim and seal off the edge of the roof.
Downloads & Data Sheets:
Product Installation Instructions
PVC Plastisol Performance Overview
Product Video:
- Choosing a selection results in a full page refresh.