Cladco 41/1000 Tile Form 0.6 Thick Mica Coated Tile Effect Roof Sheet - Black
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Colour: Black
- External Finish: Pre Laq Mica Coating
- Internal Finish: Grey Polyester
- Material: Galvanised Steel
- External Face: 41/1000 tile sheet, 41mm profile height, 200mm pitch
- Width: 1000mm (when lapped)
- Length: Cut to size 1000mm - 6000mm
- Gauge thickness: 0.6mm
- Weight: 6.6kg/m2
- Minimum Pitch: 12 degrees
Description:
Cladco 41/1000 Tile Form are often referred to as tile effect roofing sheets, these Tile form roof tile sheets are designed to look like an authentic pan tile roof. Cladco's Tile Form metal sheets really do give the appearance of traditional clay tiles. Using 0.6mm galvanised Swedish Steel, they are formed and then given an extremely tough and hard-wearing Mica coat on the external face.
Cladco 41/1000 Tile Form feature a profile height of 41mm and each pantile roof sheet covers a width of 1000mm when installed and is available in either Copper Brown, Graphite Grey or Black.
Available for use as single skin tile form on domestic, industrial, commercial and agricultural buildings. These tile effect roofing sheets can be used as single skin tile form sheeting, to over clad an existing roof or an external face of a built-up insulated system. Suitable for roof pitches of 12 degrees or higher.
This desirable steel roof tile sheets blend well into older, culturally sensitive areas and can also give a fresh new look to new buildings. Cladco Profiles tile sheets use Greencoat colour coated steel, an eco-friendly long-lasting material which is far superior to other materials, meaning your new roof will last much longer.
Downloads & Data Sheets:
Product Installation Instructions
Product Video:
1500mm
- 1500mm
- 1600mm
- 1700mm
- 1800mm
- 1900mm
- 2000mm
- 2100mm
- 2200mm
- 2300mm
- 2400mm
- 2500mm
- 2600mm
- 2700mm
- 2800mm
- 2900mm
- 3000mm
- 3100mm
- 3200mm
- 3300mm
- 3400mm
- 3500mm
- 3600mm
- 3700mm
- 3800mm
- 3900mm
- 4000mm
- 4100mm
- 4200mm
- 4300mm
- 4400mm
- 4500mm
- 4600mm
- 4700mm
- 4800mm
- 4900mm
- 5000mm
- 5100mm
- 5200mm
- 5300mm
- 5400mm
- 5500mm
- 5600mm
- 5700mm
- 5800mm
- 5900mm
- 6000mm
Related Products
Cladco 41/1000 Tile Form 0.6 Thick Mica Coated Tile Effect Roof Sheet
Cladco 41/1000 Tile Form with DRIPSTOP Anti-Condensation 0.6 Thick Mica Coated Tile Effect Roof Sheet
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Prelaq Mica Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in Prelaq Mica Finish - 200mm x 200mm
Cladco Tileform Profiled Foam Fillers to fit 41/1000 Tileform Sheeting - Black (Pairs)
Cladco TEK Sheeting Screws to Wood with 19mm Bonded Washer (pack of 100)
Cladco TEK Sheeting Screws to Light Steel with 19mm Bonded Washer (Pack of 100)
Cladco TEK Sheeting Screws to Heavy Steel with 19mm Bonded Washer (Pack of 100)
Cladco Sheeting Screws to Wood with BAZ Washer (Pack of 100)
Cladco 22mm Stitcher Screws with a 16mm Bonded Washer (Pack of 100)
Soudal Silirub 2 Silicone Elastic Low Modulus Sealant - 300ml Clear
Cut Level 5 Protective Safety Gloves - Conforms to EN388 (4543)
Cromar VENT3® Classic Breathable Membrane 1.5m x 50m (75m2 roll)
Cromar VENT3® Classic Breathable Membrane 1m x 50m (50m2 roll)
Klober Permo AIR 160 Breathable Membrane 1m x 50m (50m2 roll)
Cladco 41/1000 Tile Form 0.6 Thick Mica Coated Tile Effect Roof Sheet - Black
Cladco 41/1000 Tile Form 0.6 Thick Mica Coated Tile Effect Roof Sheet - Graphite Grey
Cladco 41/1000 Tile Form 0.6 Thick Mica Coated Tile Effect Roof Sheet - Copper Brown
Cromar VENT3® AIR - High Performance Breathable Membrane 1m x 50m (50m2 roll)
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Colour: Black
- External Finish: Pre Laq Mica Coating
- Internal Finish: Grey Polyester
- Material: Galvanised Steel
- External Face: 41/1000 tile sheet, 41mm profile height, 200mm pitch
- Width: 1000mm (when lapped)
- Length: Cut to size 1000mm - 6000mm
- Gauge thickness: 0.6mm
- Weight: 6.6kg/m2
- Minimum Pitch: 12 degrees
Description:
Cladco 41/1000 Tile Form are often referred to as tile effect roofing sheets, these Tile form roof tile sheets are designed to look like an authentic pan tile roof. Cladco's Tile Form metal sheets really do give the appearance of traditional clay tiles. Using 0.6mm galvanised Swedish Steel, they are formed and then given an extremely tough and hard-wearing Mica coat on the external face.
Cladco 41/1000 Tile Form feature a profile height of 41mm and each pantile roof sheet covers a width of 1000mm when installed and is available in either Copper Brown, Graphite Grey or Black.
Available for use as single skin tile form on domestic, industrial, commercial and agricultural buildings. These tile effect roofing sheets can be used as single skin tile form sheeting, to over clad an existing roof or an external face of a built-up insulated system. Suitable for roof pitches of 12 degrees or higher.
This desirable steel roof tile sheets blend well into older, culturally sensitive areas and can also give a fresh new look to new buildings. Cladco Profiles tile sheets use Greencoat colour coated steel, an eco-friendly long-lasting material which is far superior to other materials, meaning your new roof will last much longer.
Downloads & Data Sheets:
Product Installation Instructions
Product Video:
- Choosing a selection results in a full page refresh.